Introduction to Safety Measures for Outdoor Cultural Tourism Equipment
Release time:
2022-10-08
What are the safety measures for outdoor recreational tourism equipment? Let's take a brief look together. The overall structure of the passenger section of amusement facilities operating in the air should be solid and reliable, and important parts should have safety measures in place. The number of steel cables or chains used for the passenger suspension section should not be less than two.
Outdoor amusement equipmentWhat are the safety measures? Let's take a brief look together. The overall structure of the passenger part of amusement facilities operating in the air should be solid and reliable, and important parts should have safety measures. The number of steel ropes or chains used for passenger suspension should not be less than two. When one breaks, it should maintain a balanced connection with the valve seat part.
For closed cockpit doors that are more than 1 meter above the ground and cannot be opened from the inside by passengers, two locking devices or one locking device with a safety feature should be set. The blocking devices at the entrance and exit of non-closed cockpits should also have locking devices with safety features.Outdoor amusement equipmentDuring operation, if there is a sudden power failure or equipment malfunction that endangers passenger safety, automatic or manual emergency stop devices should be set. After a malfunction occurs in outdoor amusement equipment, measures should be in place to guide passengers.
What are the passenger safety restraint devices like? Let's take a brief look together.
When outdoor amusement equipment is in operation, passenger restraint devices should be provided when passengers may be moved, collided with, thrown out, or slide out of the ride. If necessary, high-risk amusement facilities should consider two independent binding devices. Safety belts, safety pressure rods, stop rods, etc. can be used.
Restraint devices: They should be reliable, and the parts that come into direct contact with passengers should have appropriate softness. The design of the restraint device should prevent any part of the passenger from being pinched or squeezed, and it should be easy to adjust and operate.
Safety belts: They can be used alone in facilities with slight shaking or slower vertical speeds, where there is no risk of overturning or being thrown out. Generally, the use of safety belts should be accompanied by auxiliary handles. For facilities with intense movement, safety belts can serve as auxiliary restraint devices.
Safety pressure rods: When amusement facilities are in operation, there may be a risk of passengers being thrown out, so corresponding types of safety pressure rods should be set; the safety rods themselves should have sufficient strength and locking force to ensure that visitors are not thrown or fall, and they should remain locked until the equipment stops operating.
What are the safety requirements for safety fences and platforms? Let's take a brief look together.
Safety fences should be set at the entrances and exits, and guiding fences should be set at the entrance. The platform should have anti-slip measures. The opening direction of the safety fence gate should be consistent with the direction of passenger movement (except in special cases). To prevent injury to hands when closing the door, the gap between the door frame and the post should be appropriate, or other protective measures should be taken. The entrance and exit of the ride part of amusement facilities that operate while running should not be more than 300 mm above the platform. The height of the entrance and exit of the passenger part of other amusement facilities should be convenient for getting on and off.
Outdoor amusement equipmentWhat are the other safety requirements? Let's take a brief look together.
Amusement facilities should set up prominent safety signs in necessary places and parts. Safety signs are divided into four types: prohibition signs (red), warning signs (yellow), indication signs (blue), and reminder signs (green). In places accessible to passengers, there should be no exposed sharp edges, points, burrs, or dangerous protrusions. The protective surfaces of tunnels that amusement facilities pass through should use materials that are not easy to fall off, and decorations should be securely fixed.
Previous Page
Previous Page:
recommend News
From location to operation one-stop service!
One-to-one in-depth service for different needs, we look forward to cooperating with you!
Contact Us
Contact Phone:8613517090555(Mr. Ma)
Enterprise E-mail:sales@tz-toy.com
Company address: Room 322, Zhengrong Lake Capital Corner Complex Building, 333 Zhenxing Avenue, Liantang Town, Nanchang County, Nanchang City, Jiangxi Province
©2025 Jiangxi Tongzhen Amusement Equipment Co., Ltd. All Rights Reserved